钉钩工具 for ER11 Collets

Pin Vise for ER11 Collets

2024-04-19 10:52:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Pin Vise for ER11 Collets

If you have one of the popular 3018 Tabletop CNC mills, you probably have a set of ER11 collets for it. A typical set has collets from 1.0 to 7.0 mm in 0.5 mm increments, plus a 3.125 collet specifically for 1/8" shank cutters. They will clamp a shank a bit larger or smaller than the nominal size, so most anything from a little under 1 mm to a little over 7 mm can be used.

This is a pin vise made to fit those collets. It's on the large size for a pin vise, but that's called for since it can handle tool shanks of around 7 mm. Most pin vises aren't intended for anything anywhere near that size. It's still smaller than a drill chuck.

Printing:

Material: PLA

Nozzle: 0.3 mm

Shells: 0.8 mm

Infill: 16%