Sega Saturn ODE Fenrir DUO 挂架

Sega Saturn ODE Fenrir DUO mount

2024-04-19 19:05:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Updated model for Fenrir DUO, closed hole near CD cover hinge, reshaped for easier molding and assembly.
Before printing it is necessary to check and, if necessary, correct the internal holes (horizontal expansion of the holes).

Print Settings

Printer brand:
Artillery
Printer:
Artillery Hornet
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0,3
Infill:
20
Filament brand:
Geeetech
Filament color:
gray
Filament material:
ABS
Notes:
[values]
acceleration_print = 1000.0
brim_width = 8.0
coasting_enable = True
cool_fan_enabled = True
cool_fan_full_at_height = 1
cool_fan_speed = 10
cool_min_temperature = 290.0
hole_xy_offset = 0.4
infill_pattern = gyroid
infill_randomize_start_location = True
infill_sparse_density = 20
inset_direction = inside_out
ironing_enabled = True
ironing_only_highest_layer = True
ironing_pattern = concentric
jerk_print = 20.0
material_final_print_temperature = 290.0
material_initial_print_temperature = 290.0
material_print_temperature = 290.0
material_print_temperature_layer_0 = 290.0
minimum_support_area = 3.0
optimize_wall_printing_order = True
raft_base_speed = 40.0
raft_interface_speed = 40
raft_margin = 8.0
retract_at_layer_change = True
retraction_amount = 2.0
retraction_hop = 0.4
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_speed = 40
skin_monotonic = True
skirt_brim_minimal_length = 200
skirt_line_count = 3
speed_infill = 80.0
speed_print = 80.0
speed_topbottom = 100
speed_wall_x = 60.0
support_angle = 35.0
support_brim_width = 5.0
support_pattern = gyroid
support_tree_angle = 50.0
support_tree_min_height_to_model = 2
top_bottom_thickness = 1.5
wall_thickness = 1.5
z_seam_corner = z_seam_corner_inner
z_seam_type = random
zig_zaggify_infill = True