MY6812减速齿轮组

MY6812 Gear Reduction

2024-04-19 22:09:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A modified version of the gearbox on my supercharger , Fit with an my6812 and stuck it to my test bike . This is a lower gear ratio to the supercharger box however I do have this gear set modelled to fit the supercharger tho . I have run this electric drive on my bike for about 25 km in total, with some minor issues ( one being I kicked the motor and broke and bent things .) I had Ideas to make a scooter or a very large rc car with this gearbox as well

Included here are the models for the original gearbox with the machined output shaft, ( untested ) 8mm strait shaft and output gear and shaft , and some of the other parts to put this on my bike.

also included is the updated output gear that is made in 2 pieces that i plan on trying different materials for the gears as they fail.

Gearbox has front and rear mounting points and output could be directed in either direction relative to the motor .

requires :
bearings : either 608 , or 698 ( depending on witch parts are printed )
front cover fasteners are m4
box mounting holes are m6
motor: my6812 or anything else with the same mounting circle and 8mm d shaft output .
( looking for a brush less replacement )

video : https://youtu.be/FupST4NdL8c