FTRC 轴向 SCX24 超级4 车身

FTRC Axial SCX24 Ultra4 Chassis

2024-04-19 22:38:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is my take on an Ultra4 chassis for the Axial SCX24! It's designed to be used with the SCX24 stock out of the box (C10 length links) with only some long travel shocks.

The Ultra4 Chassis V2 is the better version of this chassis with better shock mounting positions in the rear. I did include the original file that I used in the video below as well as the shock mount extensions. I also designed some number plates that can be printed to add some detail if that's something you are into.

Shocks I used: https://youtu.be/-Fm97XBlBHQ

All screw holes are slightly undersized to allow you to drill to the correct size for the SCX24 screws. I found this works a lot better than printing to the exact size in case there are any tolerance issues when printing.

Build Video: https://youtu.be/-Fm97XBlBHQ

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO SATURN S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.050 mm
Filament brand:
Elegoo
Filament material:
ABS-Like Resin
Notes:
I did print this on an SLA printer as I wanted the quality and ease of printing but I'm sure it could be printed on FDM printers as well with the correct orientation and supports.