音箱外壳模型

Speaker box

2024-04-20 04:07:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a speaker box designed to hold a pair of 2 and a 1/2 inch or 66mm full range loud speakers. Or a single speaker of the same size. It was designed to fit under the cab, behind the grill of Redcat Racing's 53 Chevy COE hauler.

Visaton FR 7 4ohm full range loud speakers are the speakers shown in the photo and are what were used to design the speaker boxes.

The larger box is two piece to make installing the speakers easier. Can be glue together or bolted together as there are 3mm holes in the prints for hardware.

The twin speaker box is:
5 an 6/16s long x 2 an 12/16s wide x 1 an 9/16s tall
135mm long x 69mm wide x 38mm tall

Single speaker box is same width and height but half as long.

I printed both at 70% infill though they might produce better sound with 100% infill just to reduce flexing of the walls. They are not sturdy enough for bashers or crawlers that see a lot of abuse, I designed them for the 53 hauler which is just for cruising around.