eBud花瓶（单体或双层结构）

Vase eBud (Single or Multiple Wall)

2024-04-20 05:59:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These models are intended for single wall mode, but can be printed normally with two walls or more with normal fill.

If you scale and use single wall mode, process (slice) the file and use the slider to determine at what layer the scroll fins start. Then enter that number minus 1 in the Bottom Layers setting, for instance, 19 bottom layers. !If you do not do this for single wall mode, the fins will not be supported! (if using the included .gcode or .3mf files this should not be necessary unless you change the scale)

I used GIANTARM Silk Metallic Silver PLA an .16 or .20mm layers. Use 60deg for bed! Also used eSun blue-green silk. I recommend both.

The finished print will not hold water, but the print could be placed in a low container that will hold water. Or use dried flowers. Add pebble ballast for additional weight if desired.