3dsjs

洗漱站式混合器

Elegoo wash station mixer

2024-04-20 21:22:54

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

Elegoo wash station is great but I need more than one tub to clean stuff and I did not find easy way to get a new tab with the mixer on the bottom so I created my own mixer.

Use any plastic tab that can sit on top of the elegoo washer

print 2 part of the mixer, glue them together

push 4 6mm plastic balls (soft air guns use them) into 4 holes

glue in 4 magnet disks, I used neodymium 3mm thick 20mm diameter magnets

before you glue in the magnets check for polarity, put the 4 magnets on the washer itself, the sides that are up need to be glued into the mixer

I added some hotmelt glue on the other side in corners to better grab the magnets

put the mixer into your plastic tab and enjoy :)

video of it in action: https://youtu.be/5FzdqRRfkTw

Tags

License

CC BY

Elegoo wash station mixer
by BogdanKecman is licensed under the Creative Commons - Attribution license.

洗漱站式混合器
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢