Samsung T7 Shield SSD mount for Tilta ZCam E2 cage (or anything with 1/4" screw)

2024-04-20 22:05:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Samsung T7 Shield SSD mount for Tilta ZCam E2 cage (or anything with 1/4" screw)

Summary

A mount for the T7 Shield with 2 holes (can work with only one if you don't need 2); designed for 1/4" screws but works with anything as long as the screwhead is similar size.
The 2 holes are 25mm apart (on the Tilta cage, if you mount it on the rear 2 screws, you can still access the mic ports).

Printed from TPU (I recommend using flexible materials as it is not tightened any way, only friction is holding the SSD), holds mine nicely (won't slide out, but not too hard to remove), you might need to play around with size depending on your printer's tolerances, or if you want it to be tighter.

Recommended to print with multiple walls (at least 1mm wall width), infill doesn't really matter, neither do layer height.
Excuse my terrible print quality, the random noname TPU I have loves to randomly clog.

Also attached a dummy SSD, made by the original designer KwadLife.

Samsung T7 Shield SSD mount for Tilta ZCam E2 cage (or anything with 1/4" screw)

朋友，你觉得上面这个模型，属于下面的哪个分类？