必需的校准套件

The Essential Calibration Set

2023-03-26 20:24:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

I've taken all the calibration prints out there and condensed them into one place. I have here:

.5mm thin wall
n20mm box
n20mm hollow box
n50mm tower
nperimeter width/t tester
nprecision block
noverhang test
noozebane test
nbridge test

and more to come.

All designs are my original work and not taken from other users. But they are inspired by other users.

The 20mm box, thin wall, and 50mm tower are ideas from Spacexula's great calibration set http://www.thingiverse.com/thing:2064, and the other ones are my ideas and not influenced by others. After Spacexula's calibration set, there is quite a derivative tree.

Here are some combos I have found with my MK5 extruder:

(In order of: Layer Height, Width/Thickness, Feedrate, Flowrate PWM)

.36, 1.528, 34.1, 255
n.3, 1.789, 42, 255
n.2, 2.521, 35, 197 *This is still experimental, most prints I try with it fail :(

必需的校准套件

朋友，你觉得上面这个模型，属于下面的哪个分类？