桌下挂钩
Under-Desk Hook
2024-04-22 08:40:04
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Only one file is required for printing!
This hook is designed for use with self-stick felt pads which help keep it in place. These pads are required for a snug fit.
Which stl file should you use?
Measure your desk thickness in mm
Add 3mm to the thickness number to identify the correct stl fileExample:
My desk is 17mm thick
Adding 3mm results in 20mm. File to use: DeskHookMinimal-20mm-v1I recommend rounding down where the calculation output is between available stl files.
Print Settings
- Printer brand:
ELEGOO
- Printer:
ELEGOO Neptune 2D
- Rafts:No
- Supports:Yes
- Resolution:0.2mm
- Infill:30%
- Filament brand:
Spool3D
- Filament color:
White
- Filament material:
PLA
- Notes:
0.4mm nozzle
1.26mm wall thickness
Gyroid infill pattern
Tags
License
CC BY-NC-SA
Under-Desk Hook
by maker-tgin is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
复古风格闹钟架2023-03-26 -
桌子反面的抽屉2023-03-26 -
2023年度EDC手镯饰品2023-05-10 -
Cricut Maker 3 工具磁铁组织器2024-01-13 -
山羊/精灵族/魔鬼角 - 可拧上或穿过发丝2024-04-05
最热下载
-
Gillette吉列剃须刀架2025-07-14 -
Kumonga的孩子与澳大利亚蜘蛛驯兽队2024-03-17 -
罗宾：不公正22024-04-07 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
超越IPD板2024-05-03
最新模型
-
RAM 垂直式笔记本支架2024-05-08 -
野马Mach 1雾灯支架模型2024-05-08
-
圣诞主题旋转木马2024-05-08 -
Taco Bell Chess Set: Queen Piece 3D模型标题2024-05-08 -
UL-野营椅（280克）2024-05-06