隔膜空气发动机

Diaphragm Air Engine

2023-03-26 20:29:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Please use this product at your own risk and always wear eye and ear protection!
nDo not pressurise this engine without carrying out safe pressure tests. 3D print qualities vary and will not guarantee that the bottle cap/cylinder head can cope with high pressures.

Video for more info: https://www.youtube.com/watch?v=5B1H5syp4PM

Print info:
nMaterial: PLA (I prefer PLA as it's easy to get strong layer strength)
nNozzle diameter - 0.4mm
nPrint width - 0.5mm
nLayer height - 0.2mm

Cylinder Head Print info:
nTop/Bottom layers - 6
nOuter walls - 6 (enable single wall preimeters for the cylinder volume fins)
nInfill - 30%nnNozzle Temperature - 220c (Recommend 5-10c hotter than usual for extra strength)nnBed temperature - 50c

Other Parts Print info: (Can use your usual print settings, these are mine)
nTop/Bottom layers - 3
nOuter walls - 2
nInfill - 15%nnNozzle Temperature - 210cnnBed temperature - 50c

Required Hardware:
n13pcs M2x10 Boltsnn6pcs M2 Nutsnn4pcs MR128 8x12x2.5mm bearingsnn1pcs 0.5mm Viton Rubber Sheetnn2pcs Oring (7mm Outside diameter 2mm Cross-section)nn13pcs M2x10 Bolts

Note: Please refer to the detailed hardware list for specific specifications and quantities.

隔膜空气发动机

朋友，你觉得上面这个模型，属于下面的哪个分类？