Oneplus 12R手机支架模块3D模型

Oneplus 12R mount for RAM, AMPS

2024-04-22 15:22:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This design allows mounting a OnePlus 12R phone with OnePlus Sandstone bumper case using RAM or AMPS compatible accessories. The design allows one-handed insertion, removal of the phone from the mount. In addition to the printed parts, the following hardware is required:

4 x M3 x 8 bolts
4 x M4 x 12 bolts
4 x M4 standard nuts
1 x AMPS adapter plate for 1 inch ball mount or similar (38mm x 30mm M4 hole pattern)

Assembly is pretty straight forward. I intend to glue the camera shim to the mount after testing it for a few days.

This design is an update of my Pixel 2XL and Oneplus 7T mount found here: https://www.thingiverse.com/thing:5477772

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE X
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.3
Infill:
33%
Filament brand:
California Filament
Filament material:
PETG, nylon
Notes:
The mount in the pics is printed in PETG, with the exception of the clip which is printed in nylon. From experience with another mount, I expect the PETG plate to warp in the heat this summer. I intend to reprint the plate in Matterhackers Ryno before summer. If that warps in a way that makes it unusable, I will reprint the plate in nylon.