奥林匹斯笔 (S) 拇指握把

Olympus Pen (S) Thumb Grip

2024-04-22 19:34:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This part is compatible with the original Olympus Pen from 1959. It should also be compatible with the Olympus Pen S, but was only tested with a non-S model.

How to Install:

Remove the top cover.
Remove the film winding wheel (Remove the two brass screws holding it on).
Screw off the two screws holding the thumb grip (or pieces of the old one).
Screw on the printed thumb grip.
Put the camera together.

Tips:

I would recommend to replace the light seals during the installation, as it is much easier to glue in the seals with the top cover and thumb grip removed.
The film counter screw can be removed with a bent paperclip.
Be carefull to not leave the camera in the sun if you are using PLA for this part