PLA羚羊模型额外翼尖

Pla moose additional wingtip

2024-04-22 20:16:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an additional wing piece 20 cm long. It makes the plane 140 cm of wingspan and is has the same symmetrical airfoil of the original plane. It does not include ailerons as it is round. Thanks the_crack_fox for this amazing plane!

My build is about 1.6 kg and i made a big mistake by printing the fuselage with high infill.

I added a servo with a nosewheel on the front.

For the wing/aileron/elevator/rudder joints I used Ikea tupperware lid.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
Yes
Supports:
No
Resolution:
.4
Infill:
2 (if you have bambulab use the hilbert curve on all the wing pieces or the normal square grid)
Notes:
I suggest 1 wall thickness on the wings printed with low speed to make the layers' bond strong and use 2 wall thickness on the fuselage and cubic infill at 2%. I also used an alluminium spar as it does not reach the end of the wing. I used a 1kv motor with 4s batteries and arduino and nRF24L01 to communicate.