播种托盘植物生长器高度延伸装置
Seed Tray Propagator Height Extension
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfanSummary
This is a height extension for seed trays and propagator lids, allowing taller pots and plants to fit inside.
It should fit most of the common size of rectangular seed tray that measures 360 x 220 mm on the inside of the rim.
Sized to fit the bed of a Prusa MK3 or other similar printers. Print two pieces which will interlock loosely when placed on the seed tray.
Two sizes add either 25 mm or 55 mm height. They're stackable too.
(Note that the photo shows a prototype that differs slightly in the area where the two pieces meet).
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:No
- Supports:Yes
- Filament brand:
Any
- Filament color:
Any
- Filament material:
PETG
- Notes:
Supports will be required, as both top and bottom faces are stepped to fit the trays or to accept a lid.
It doesn't need to be particularly strong. I used two perimeters and 5% gyroid infill.
I think any filament material should work. I found a nice translucent green PETG which worked well.
相关内容
联系我们
最新模型
-
摄像机装备2024-05-08 -
阿普丽亚油回收器3D模型2024-05-06 -
叉子与托盘 - 专为Bruda玩具设计2024-05-06 -
死亡收割者 永不遗忘2024-05-06 -
RC球杆末端压缩机2024-05-06
最热下载
-
1:144 比例星际飞船模型2023-03-26 -
东方风格机械关节龙3D模型2023-03-26 -
罗宾：不公正22024-04-07 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14
