超微电脑 FAN-0126L4 Noctua NF-A8 风扇替换适用于2U服务器

Supermicro FAN-0126L4 Noctua NF-A8 replacement for 2U

2024-04-23 07:22:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

超微电脑 FAN-0126L4 Noctua NF-A8 风扇替换适用于2U服务器

Summary

Remix of the fan housing from Nubbit's excellent Supermicro FAN-0126L4 Noctua NF-A8 replacement. (https://www.thingiverse.com/thing:5452309)

Changes I've made are moving the cable cutout to behind the locking tab to allow for not cutting the cable sleeve, and removing the top pull tab to fit into 2U cases.

Copied description below:

This is a replacement fan housing with fan guard for the 3 center fans of my Supermicro CSE-836 case as I didn't want to cut up the original ones to fit my Noctua NF-A8 PWM fans. It should be compatible with loads of other Supermicro 2U/3U/4U cases including CSE-213, CSE-216, CSE-219, CSE-826, CSE-836, CSE-847, CSE-848.

I didn't like the existing designs on Thingiverse which route the cable on the outside of the housing and didn't come with a latch hook so I designed a new one including a latch hook. Too bad there was nearly no space running the wires so I could only fit a small guide on the lower side.

To make it work you need to cut off the cable sleeving of your Noctua fan but the rubber anti-vibration dampers can stay on although it will be a little cramped.

This housing uses some pretty tight tolerances as there isn't much room so some size tweaking may be required.

Also I may redesign the connector holder in the future as the connector doesn't always stays in the connector holder when removing the housing from the server. The connector Noctua uses doesn't have any notches on the connector which the original fan connector does. This isn't a big issue but sometimes you have to pull the cable after removing the housing. If anyone is having trouble with it please let me know in the comments.