刀剑

Sword

2024-04-23 07:50:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed this sword because I couldn't find any on here that weren't from a media, or I just simply didn't like the look of. The total length of the sword is 776mm (30.55 in). The blade's length is 600mm (23.62 in). The pins used are 30mm long and have a diameter of 5mm. You will need 9 of these to assemble the entire sword. You will also need 2 of the cross guard pins which will connect the handle, cross guard, and blade segment 4. I suggest printing the pins horizontally or at an angle, and with 100% infill. I am currently printing this for myself, and I will add pictures when I finish it. I may or may not add different cross guards, pommels, or handles, but I'm not sure yet.