Tuya 无线WIFI PIR 调节式支架

Tuya wifi PIR adjustable holder

2024-04-23 13:31:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I put a Tuya Aubess Wifi PIR sensor on a shed that would trigger a Smart Life routine to turn on some lights so that in the dark you can see the door knob and the key hole.
I just wanted the sensor to turn on the lights as you walked towards the shed.
Instead I got the lights turning on when wind moved the trees and cars drove by and everything else.
So this is to mount and tilt the sensor down so that it picks up just movement close to the shed.
I also put a hood over the PIR sensor so that it wouldn't pick up the cars that went by on the street.
To be universal I used a gopro type connection and screw clamp.

The sensor just slides into the back of the box after you put the hood into the box.
You don't have to use the hood.

5mm nut and bolt is required about 30mm long.

I know that I got the knurled knob from some other 'Thing', but I can't seem to find it anymore.