Enders 3 Mod Y轴张力器改进版

Ender 3 Mod - Y Axis Tensioner

2023-03-26 20:35:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

```html

Just a Remix of the Tensioners designed for my Cr-10, as requested by the user TallDonkey on the original Y Axis Tensioner page.

Update of 29/06/2019

MAJOR UPDATE!

Y Tensioner for Ender 3

Mk7 Version

Upgraded the guide system and simplified all the models
Unified the screws dimensions (with my other tensioner versions)
Modified the minimum belt tensioning position (for short belts)
Slightly increased the tolerances compared to previous models
Added a New Shaped Knob, more "fancy" than the previous version.

Printing Tips :

Body --> Print in Vertical (better with supports)
Screw --> Print Horizontally, lying on the flat face
Knob --> Print in Vertical (No supports Required)

Hardware Requirement :

For the F688Z Bearings Version (OEM?):

1 Screw M4x20 (Button Head) --> Need use adapter
Or - 1 Screw M8x20 (Button Head)
2 Bearings F688Z
2 Screw M4x8 (Button Head)
2 T-Nut M4

For the F624Z Bearings Version :

1 Screw M4x20 (Button Head)
2 Bearings F624Z
2 Screw M4x8 (Button Head)
2 T-Nut M4

For the GT2 Version :

1 GT2 Pulley 20T
1 Screw M3/M4/M5 x20 (according the Pulley bearings)
2 Screw M4x12 (Button Head)
2 T-Nut M4

Fixing system :

2 screws M4x8
2 t-nut M4

The models are designed for the material stated below.

Note :

I didn't print personally this version, but fittings and tolerances are the same for all my models, so, I am sure they fit together correctly!

If you cannot fit the pieces after the print, you are doing something wrong!

(Sorry guys, but I am tired of comments from people who are unable to print, and blame the models...)

Update of 22/07/2019

Small modification to the body model, in order to have a smooth transition from the tensioner body to the frame.

Furthermore, added the body version for GT2 pulleys, for this kind of pulleys, the screw will sit 2 mm lower than the OEM version, due to GT2/OEM sprockets pithc diameter differences.

Hope you enjoy it

Support my Creations : Buy Me a Beer!

```Enders 3 Mod Y轴张力器改进版

朋友，你觉得上面这个模型，属于下面的哪个分类？