SanDisk 超极 USB 的盒
Box for SanDisk Ultra USB
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Here is a box to protect the Sandisk Ultra USB key.
Basically I had modeled the double version in order to ensure that my two keys were always together, but I decided to make a single version.
The box is sober and simple, with a magnetic lid (6x3 magnets). I also placed a magnet inside the box so that the USB key is magnetized thanks to its USB end. (It's up to you if you want to put it).
For a single box: 8 to 9 magnets
For a double box: 8 to 10 magnets
Depending on the prints, you will need to force slightly to put the magnets in place, sometimes you need to stick them…
Here are the magnets I used: https://www.amazon.fr/dp/B0CH3D5G4N?psc=1&ref=ppx_yo2ov_dt_b_product_details
This is a V1, don't hesitate if you have any suggestions!
Print Settings
- Printer brand:
Wanhao
- Printer:
Wanhao Duplicator i3 V1
- Rafts:No
- Supports:No
- Resolution:0,4
- Infill:20
Tags
SanDisk 超极 USB 的盒相关内容
联系我们
热门推荐
-
Jura Impressa C5咖啡锅容量扩展器2023-04-06 -
乐高火车轨道 - 直线型配有RC522安装模块2023-04-15 -
面板视图19英寸立架模型2024-03-14 -
圆形人行道100毫米2024-03-25 -
Quadlock适配器2024-04-19
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
智能骰子滚动器2024-01-06 -
红米手表4号充电基座2024-03-15 -
Dado - 立方体模型2024-03-24
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
用于加长杆的戴森配件支架2025-07-17 -
丰满跪姿美熟女2025-07-16
