爬行动物（变色龙）饮水水景
Reptile (Chameleon) Water Stream for drinking.
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a 3 part dripper system for Reptiles. Made especially with Chameleon Terrariums.
You will need....
3 watt USB Mini pump
6mm OD irrigation tubing
Gel double sided self adhesive / Silicone to seal Base with Lid
The "Top" section is to clamp down on fake wide leaves if you wish to have them under the droppers. It is not essential to to the model in any way. Only the base and Lid.
The pins are to block the flow of each spout and reduce it to a slow dripper. Without the pins it will gently flow and trickle off the end of the spout.
This is still a work in progress.
Print Settings
- Printer brand:
Flsun
- Printer:
Flsun QQ-S
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:60%
- Filament brand:
Eryone PLA+
- Filament material:
PLA+
Tags
License
Reptile (Chameleon) Water Stream for drinking.
by Flukewin is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
弗朗西斯涡轮机3D模型2023-03-26 -
40×0型风扇安装件（适用于E3DV6型号散热片，中心对齐）2023-05-28 -
冒险者 5米屏幕垂直背板2024-03-21 -
Scotty 传感器支架扩展套件2024-03-26 -
用于Raspberry Pi高质量摄像头的D型安装适配器2024-05-08
最热下载
-
SpaceX星舰S20/B4 3D模型2025-07-15 -
QC USB充电器外壳（XFW-KC42-4）2024-01-17 -
史诗级生存刀具2024-05-03
最新模型
-
Ender Board 螺丝模式2024-05-08 -
铁匠铺 HO 比例 3D 模型2024-05-08 -
口技演员假人头2024-05-06 -
太阳能板支架2024-05-06
