三维模型构建与材质绘制

mTOC

2024-04-28 15:56:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The ISG mTOC (https://integratedskillsgroup.com/2024/04/the-isg-micro-operations-center/) is a raspberry pi/linux based terminal made for disaster response. Using a heavily modified version of Jay Doscher's "recovery pi", we've created a tool for planning, briefing, intelligence gathering, and signal analysis that can interface with a variety of ancillary tools such as drones, HackRF/RTL-SDR etc, and HDMI projectors to present findings and assist with planning.

The goal of the mTOC is to provide a micro Operations Center that can be rapidly established and acts as a nucleus once more powerful or elaborate equipment becomes available, but still retains a low energy footprint option that can be used as a stand alone terminal.

Equipment Requirements:
Full list with links in article
https://integratedskillsgroup.com/2024/04/the-isg-micro-operations-center/

Raspberry Pi (4B used)
Waveshare SIM7600 4G tophat
Sunfounder IPS/Internal Battery
2x 1' USB m to f extension cable panel mount
2x 2' USB m to f extension cable panel mount
1x micro HDMI m to HDMI panel mount
1x 3-prong power toggle
2x NKK 3 point toggle switch
1x 5.5x2.5mm barrel plug connector extension cable
1x USB-C 1' extension cable panel mount
1x RJ45 extension cable panel mount
1x MicroSD extension ribbon cable (mountable)
1x SIM card extension ribbon cable (mountable)
Edgelec Jumper wires (assorted)
MCStaite micro keyboard
Perixx Peripad-501 II trackpad
SanDisk Extreme 256gb MicroSD card
Activated SIM card (carrier depends on use and location)

NOTE:
Several versions of the mTOC exist. This version, 1.4, includes the most current version, which features a face that allows use of HDMI, audio, all 4 USB ports, and has cut outs for on/off switches for the Pi and the Switch, as well as a master power. The master power switch acts as a disconnect from the UPS to the PI, which when left on keeps some LEDs on that slowly drain the unit's power supply.

The goal with this model is to ensure the user doesn't have to remove the chassis from the Pelican 1300 case.