Sharpstar 61 EDPH II 视觉眼镜适配器

Sharpstar 61 EDPH II Visual Eyepiece Adapter

2024-04-28 15:56:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I bought a used TS 61 EDPH for AP. I wanted to use it also for visual observations so I designed an 2" exepiece adapter. Just add three M4x20 allen screws. You can print knurled knobs from here: https://makerworld.com/en/models/74557#profileId-79230 or from any other source you like.

If you need, you can also print the 2" --> 1.25" adapter too.

Works very well.

I had the best results with PLA+ so M63x1 thread fits very good. With PETG or other materials dind't work very well.

Print at finest resolution possible ( I did it with "extra fine" 0.08mm ).
Printed M63 Adapter with 100% infill. 2 inch to 1.25 inch adapter with 60% infill and 8 walls.