轮子适配套件 for IKEA Utesepelare

Wheel adapters for IKEA Utesepelare

2024-04-28 19:53:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

You wish to have a mobile computer desk? You like IKEA stuff? You live in North America where you can only buy Imperial stuff at the hardware store while IKEA stuff is all metric? I know... really specific need. Though it was one of mine and now I share it to the community.

You will need some wheels (I used 50mm rubber one) and ¼ x ¾ bolts with nuts and washers. You will have to attach the adapter to the leg using the special bolt from the IKEA kit then attach the wheel to the connector. Following the IKEA assembly plan, this will be replacing the step 1.

I made 2 versions of the adapter since the holes at the bottom of the desk legs isn't always centered. It is preferable to have the version will the 4 stoppers but 2 work just fine.

I printed the adapters with 6 walls and 50% infill using Black PLA-CF to make them strong.

There you go! A nice mobile computer desk.