博世吸尘器鼻毛清理机
Nose cleaner for Bosch vacuums
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Quick thing that I made to help our baby breath better when she has a flu. I used a rubber tube with 6mm inner diameter in between the parts.
I made to fit our Bosch Serie 4 vacuum cleaner, but should fit directly to any newer bosch vacuums and most likely other models too.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:Yes
- Supports:No
- Resolution:0.2
- Infill:20%
- Filament brand:
Prima Creator
- Filament color:
White
- Filament material:
PLA
- Notes:
I suggest using PETG for this. Use a brim for tip part. Wont need supports and you should print these in the orientation that they are in. ALSO 0.16 or 0,12 layer height would be better for the tip.
Tags
License
Nose cleaner for Bosch vacuums
by Carr0t is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
ST150轮子螺母更换2023-05-01 -
Wörthersee 11cm Tester2023-05-13 -
刀剑守卫：Zenitsu2023-05-13 -
最终派系平躺标识牌支撑2024-03-17 -
手机和平板支架套装2024-03-17
最热下载
-
Glock 17/34 Solidworks 模型文件2023-04-21 -
E3D火山喷嘴2023-05-26 -
Dado - 立方体模型2024-03-24 -
Logitech G604鼠标扫描数据与橡胶替换2024-04-08 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
模块化笔筒链2025-07-19 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
女式凉鞋2025-07-16 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24
