龙守护神
Dragon Amulet
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Dragon Amulet. This amulet was loosely inspired by the symbol of the dragon god Bahamut in Dungeons and Dragons.
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu X1C
- Rafts:No
- Supports:Yes
- Resolution:0.2mm nozzle
- Infill:15% infill
- Filament brand:
Bambu and CC3D
- Filament color:
Gold, Bronze and Silver
- Filament material:
PLA Basic and Silk
- Notes:
Material: Bambu PLA Silk Gold, PLA Basic Bronze and CC3D PLA Silk Silver.
Print recommendations: Full colour and single colour profiles available. See print details below for settings.
Supports: Yes - very tiny supports under the claws. These are typically removed quite easily with a fine needle or pin.
Print details:
Bambu Lab X1 Carbon 0.2 nozzle
0.06mm High Quality layer height
4 walls
15% infill
Travel speed: 300 mm/s
Height range modifiers: Height range modifiers are added to change the top surface pattern on certain layers. to create different effects:- 0.00 - 2.44mm AND 5.30 - 5.45 mm - Archimedean Chords top surface pattern
- All other ranges - default top surface pattern.
Post-Printing
Supports are typically removed quite easily with a fine needle or pin (See below).
Tags
License
Dragon Amulet
byJinivusis licensed under theCreative Commons - Attribution - Non-Commerciallicense.
相关内容
联系我们
热门推荐
-
单18350型号电池的盒子2023-03-26 -
双动作OTF隐藏刀具（刺客风格）2023-03-26 -
丁丁模型2024-04-22 -
多板结构胶带夹持器2024-04-30 -
除臭剂盒2024-05-03
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Nissan S13 Silvia BN 运动装备套件 RC车身 1:10 3件2023-08-23 -
红米手表4号充电基座2024-03-15 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
CZ455 452 512 弹匣底板2024-04-22
最新模型
-
一体打印行星齿轮2025-07-15 -
劳拉的基础模型2024-05-08 -
SSR 衬套盖2024-05-08 -
鱼苗模型2024-05-08 -
18650充电宝模型2024-05-06