金属加工机床夹紧螺母架
Lathe-Chuck-Nut-Holder
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Sory about photos, I only had BLACK which is extra hard to see.
Makes it easy to ON AND OFF the nuts that hold the chuck and other things bolted to the spindle.
For I think all China made lathes with the standard chuck. 7 x (10 or 12 or 14) lathes.
The nuts will just flip on and off. Just be careful with wrench while tighting, not to bust off
the small plastic nut tabs.
Make sure the plastic nut tabs on your printed part have NO burs or catches before you glue it on.
I used super glue....which may only last a while. Use contact glue if you have it, after
degreasing all the oil around your two glue surfaces.
Print extra slow....... 30-40 mm/s, I used pla-plastic but others may work even better.
Mine works great, enjoy!!
Tags
金属加工机床夹紧螺母架相关内容
猜你喜欢
联系我们
热门推荐
-
SnapMaker J1驾驶舱扩展3D模型2023-04-05 -
Na Miata 240SX 原厂经典车型 + 后灯装饰插件2023-05-10 -
老板螃蟹 KGC-0102023-09-08 -
Arduino继电器模块外壳2024-01-14
最热下载
-
奥瑞图尔 Obsidian - Marlin 固件 PID 打印床解锁2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
GTA 5 大地图模型2024-04-21 -
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
最新模型
-
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
HGX lite v2支架2025-07-18 -
女式凉鞋2025-07-16 -
关节活动人，假人13,Dummy 132025-07-02