R2-D2 经典开关组件——Kenner X-Wing 模型专用
R2-D2 Switch For Kenner X-Wing
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I finally got an original Kenner model X-Wing and it was, of course, broken. The R2 unit on top is used as a switch for the X-Wings had a cracked post on the inside and this part is necessary for the correct functioning of opening and closing of the wings.
Here is a perfect replacement. The post on the inside is slightly undersized so that it fits inside the recess of the blue clip. You'll understand what this means when you take it apart.
Ready for paint. Print as shown with tree supports touching buildplate if you're using an FDM. Mine came out well at 0.12 level height at 50 mm/s
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:Yes
- Resolution:0.12
- Infill:20
- Filament brand:
Inland
- Filament color:
Any
- Filament material:
PLA
- Notes:
Print as shown- right side up - with Tree supports touching buildplate. No raft, no brim should be necessary. This printed in about 1 hr 17 minutes at 50 mm/s on an Ender 3 Pro.
Post-Printing
Original part compared to printed part
Tags
License
R2-D2 Switch For Kenner X-Wing
byOldCrankyBmullzis licensed under theCreative Commons - Attribution - Non-Commerciallicense.
相关内容
联系我们
热门推荐
-
血之河流 - Elden Ring2023-03-26 -
轴承支撑装置2023-03-27
-
我的3D模型测试打印2023-06-13 -
速率板输入调制器传感器支架2024-01-08 -
3D模型: Lula2024-04-07
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）2024-01-11 -
Hein Gericke 摩托车骑行服 Hiprotec 系统用的按扣（替换件）2024-04-03
最新模型
-
任意立方体活动关节的一体打印外星人2025-07-19 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
鞋带锁2025-07-17 -
艺术雕像（女性）2025-07-16 -
天使和恶魔2025-07-16