BCAR兼容的kirin枪管护套

BCAR Compatible Barrel Shroud for Kirin

2024-04-30 23:15:03

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

抖音私信 @jobsfan

I remade the shroud from scratch then made the shroud big enough to allow for a BCAR.

It can probably fit any BCAR but I've tested with the Worker BCAR without sleeve, ex BCAR, and ex BCAR rev2.

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Resolution:
0.2
Infill:
15%
Filament brand:
Hatchbox
Filament material:
PLA
Notes:
3-4 walls, 15% infill, gyroid
Print one and print another mirrored one, so you have both halves. Ensure you have correctly mirrored it or else it won't fit.
I printed mine on an angle to add white stripes using my AMS.

Hardware:

4x M3x25
4x M3 Nuts

Assembly:

Press the nuts into the holes of one half. It might be a tight fit. With the part on the table, I used a small M3 screw and my screwdriver to push.
Put the two parts together over your barrel, BCAR, & the alignment peg on the Kirin.
Screw together

Again, please ensure you have correctly mirrored it or else it won't fit.