动态之墙 - 魔法：集合
Animate Wall - Magic: The Gathering
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A model of the card Animate Wall from Magic: The Gathering. One of the models has a slot that fits a CGC graded card slab so it can be used as a display stand to show off your graded Animate Wall!
Print Settings
- Printer brand:
Anycubic
- Printer:
Mega Zero
- Rafts:Doesn't Matter
- Supports:Yes
- Resolution:.28
- Infill:10
- Filament brand:
Generic
- Filament material:
PLA
- Notes:
Print upside down to avoid needing too much support for the lip around the top. Use support on the feet, arms, and within the card slot.
Post-Printing
If printing upside down (Recommended):
The slot has about .5mm clearance for the depth of the slab, so you may need to clean up the edges of the slot depending on how accurate your printer is (e.g., if you have some elephant's foot).
Optional Weathering
I used an X-Acto blade to scuff up the corners and lip at the top to weather it a bit like the card's art. If you plan to do this, use a wall line count of 3 (at least).
Tags
License
Animate Wall - Magic: The Gathering
byTucker178is licensed under theCreative Commons - Attribution - Non-Commerciallicense.
相关内容
联系我们
热门推荐
-
SnapMaker J1驾驶舱扩展3D模型2023-04-05 -
可互换的米老鼠耳朵2023-06-24 -
Schildkröte Line Tank2023-08-08 -
空气软枪缓冲管板 (AEG, 后置连接木制部件)2024-01-03 -
头发修剪架2024-01-10
最热下载
-
佳能EOS镜头连接接口2024-01-11 -
QC USB充电器外壳（XFW-KC42-4）2024-01-17 -
Logitech G604鼠标扫描数据与橡胶替换2024-04-08 -
手指机器人MX版2024-04-14 -
Ikea 米兹顿 插嵌2024-04-20
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
模块化笔筒链2025-07-19 -
兔女郎半身像2025-07-15 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15
