MPMD Monoprice Mini Delta E3D Revo 热端部件替换

MPMD Monoprice Mini Delta E3D Revo Hotend Replacement

2024-05-01 12:34:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

MPMD Monoprice Mini Delta E3D Revo 热端部件替换

Summary

I really like the design for the V6 hotend from evancli, but I wanted to install a Revo Micro. I ended up having to almost totally redesign it, but a big thanks to evancli for sharing his hard work.

My changes:

Moved from E3D V6 to E3D Revo Micro hotend
Redesigned cooling a little (it still needs improvement - really it needs two directions and to be closer to the nozzle)
Since the Revo Micro is shorter, I had to twist the part cooling fan to make it all fit, and I had to angle the heatsink fan.
I added a baffle to block the heatsink fan flow from hitting the hotend
I changed the embedded nuts to holes for brass inserts - just a personal preference
I added a third mounting point to match the one that was originally on the machine

One negative change that I made is the upper part now needs support... sorry.

Mine is printed in carbon fiber ASA. The prototypes were in Sunlu PLA+ and worked fine, but I want to print higher temperature filaments.