三星Galaxy S8手机壳，TFT液晶显示器中国替换屏

Galaxy s8 case for TFT Chinese replacement display

2024-05-01 14:55:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

三星Galaxy S8手机壳，TFT液晶显示器中国替换屏

三星Galaxy S8手机壳，TFT液晶显示器中国替换屏

Summary

IMPORTANT

This case is ONLY for a galaxy s8 with the flat TFT replacement screen from China.

I had to make this case because other ones wouldn't fit this new taller flat display.

I used M2 20mm machine screws to fasten the bottom. Drill the holes out in the small piece 2.2mm in diameter and 1.8mm into the large piece to fit nicely.

This has been scaled up to fit well for more inconsistent filament and to account for a bit of shrinkage. I use recycled HIPS so i get a bit of inconsistency and boogers here and there. I took a round dremel file to clean all the boogers and smooth out the inside corners to fit perfectly.

If the phone is hard to slide in then do not keep pushing, this will crack the thin glass corners. Either scale up or clean up the inside more.

Print Settings

Printer brand:
Anet
Printer:
A8
Filament brand:
Self made
Filament material:
HIPS
Notes:
refer to instructions for fasteners and fitment.

Post-Printing

Clean up any protrusions on the inside for proper fit.

License

CC BY-NC

Galaxy s8 case for TFT Chinese replacement display
byAlobster111is licensed under theCreative Commons - Attribution - Non-Commerciallicense.

三星Galaxy S8手机壳，TFT液晶显示器中国替换屏

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

GPD Win3 把手型号
2023-04-07
GMX曲线支架支持GoPro安装（或轻型结构）
2023-05-22
完全可打印的无人机框架
2023-05-31
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）
2024-01-11
GLOCK 17（第三代）蓝枪
2024-04-13

最新模型