旋风双子座大型倾斜窗帘风扇导管 - 带加热内衬孔

Vortex Gemini Larger and Angled Curtain Fan Ducts - With heated inserts holes

2024-05-01 23:54:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

What has been done:

Enlarged the duct tip (12 mm)
Angled the top part of the tip to help redirect the flow.
Angled the part that goes to the extrusion, so the duct points downwards a little bit more (only the versions that do not say “non angled”).
Increased the lenght of the mounting holes to give more liberty. Now you can position the ducts nearer or farther of the heated bed.
Added heated insert holes - Prevent the wearing of the duct holes after removing and putting the fans. Also enlarged the holes for allowing the use of larger screws.

I recommend to use support and to not turn the models!

Sorry but the “angled versions” were a bit difficult to make. The issue was with the right model, so what I did was to just clone the left one, mirror it to the other side and replace the mounting. It works great, but you might see some skin issues in the outside. I modified the STL in tinkercad.