大众Mk1 HVAC选择器支持

VW Mk1 HVAC Selector Supports

2024-05-02 00:09:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A couple of small pieces to help you repair a common failure point in the VW HVAC cool/hot selector used in many VWs in the 70s and 80s.
This is specifically made for 161 820 045A and 161 820 045B, but probably fits more.

On the selector is metal clamp that holds a cable in place. This cable is used to open and close the coolant value in the engine bay.

There is a common failure point, which the plastic piece that holds the metal clamp breaks and the selector can no longer adjust the valve in the engine bay.

The select parts are becoming very hard (and expensive) to find. This recently happened to me, so I made some support parts enabling repair of the selector.

To use this, you need to have the broken piece, and you can super glue the broken part on with these support pieces to make the repair.

I managed to fix it while it was still in the car. Let the glue fully cure, be careful to no add extra stress when re-installing the cable

Print Settings

Rafts:
No
Supports:
No
Filament brand:
n/a
Filament material:
PETG
Notes:
You can use any printer and should not need supports
Need to print with PETG, ABS or Polycarbonate to avoid warping or shrinking in high heat conditions.