Anycubic i3 Mega / Mega-S Marlin 1.1.9 定制固件 - 额外功能与质量优化

Anycubic i3 Mega / Mega-S Marlin 1.1.9 Custom Firmware - Extra Features & Quality Tweaks

2023-03-26 20:52:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Anycubic i3 Mega / Mega-S Marlin 1.1.9 定制固件 - 额外功能与质量优化

This text appears to be a description of firmware updates for the i3 Mega 3D printer. Here's a breakdown: **Benefits of using this firmware:** * **Bed Leveling Improvement:** * Addresses uneven bed surfaces that are difficult to level manually. * Uses a grid-based surface creation by probing the bed at 25 points and automatically compensating during printing. * **PID Temperature Control for Heated Bed:** * Provides more stable temperature control. * Reduces power consumption. * **Enhanced Part Cooling Fan Functionality:** * Operates at full voltage (12V) during its 100% duty cycle, allowing aftermarket fans to perform optimally. * **Printing Improvements:** * S-curve acceleration and adjustments for lifting and acceleration reduce vibrations and improve print quality. * Linear advance is unlocked (needs calibration), potentially improving printing accuracy. * **Safety Features:** * Hotend runaway protection reduces the risk of fire by detecting faulty or misaligned temperature sensors. * **TMC2208 Support:** * Supports Watterott or FYSETC TMC2208 drivers without needing reverse-wired connectors. Other TMC2208 chips might work as well. **Other Features:** * Automatic bed leveling test with a single GCode command. * Easy access to automatic PID tuning and bed leveling through a special menu. * Filament change function, allowing color/material switching during printing and controlled via the display screen. * Improved long filament pauses, stops, and resume functionality. **Known Issues:** * Lack of power-loss recovery support. * Possible discrepancies between estimated print times provided by your slicer and actual print times. * Special characters in file or folder names on SD cards can cause menu freezing. Avoid using such characters; use hyphens or underscores instead. **Important Note**: The default SD card included with the printer contains a folder with Chinese characters. Rename or delete this folder to avoid issues. Let me know if you have any other questions about this firmware description!Anycubic i3 Mega / Mega-S Marlin 1.1.9 定制固件 - 额外功能与质量优化

朋友，你觉得上面这个模型，属于下面的哪个分类？