无限发射立方体

Yet Another Fidget Infinity Cube

2023-03-26 20:52:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

To support my work and back an open-source platform, please consider downloading this model from my upload on PrusaPrinters: https://www.prusaprinters.org/prints/928-yet-another-fidget-infinity-cube-v2

I have revised this model and released v2 of my cube! Please check it out here: https://www.thingiverse.com/thing:2848678

I loved the idea of a 3D printed fidget infinity cube, but was sorely disappointed by the models available on Thingiverse. Some printed well enough to turn, but none had been optimized well for 3D printing. I set out to create my own version, with tolerances and hinges designed perfectly to turn right off your print bed.

Prints at 0.2 mm layer height and takes about 4.5 hours. Please let me know your results!

UPDATE 12/19/2017: Fixed a couple of internal walls that were causing issues with certain slicers. Thanks to @th_in_gs for the help!

UPDATE 3/31/2018: If you're using Cura, be sure to disable "Ignore Small Z Gaps" under your "Shell" settings! Thanks @runtimeterror for discovering this fix.

无限发射立方体

朋友，你觉得上面这个模型，属于下面的哪个分类？