PVC管100mm通风安装可调节

PVC Pipe 100mm Vent Mount Adjustable

2024-05-02 18:36:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hello, this is a submission of a small project of mine.

I've used PVC Pipes as a DIY ventilation system. (German: HT-Rohr; Polokalrohr)

I designed a adjustable vent for a 100mm PVC Pipe T-Piece so you can adjust the airflow to your liking.

It is not advanced by any means, but it does the job. It consists of 3 Parts, the part "Belueftung_Klappe.STL" and "Belueftung_Abdeckung.STL" have to be attached to each other with a M3 bolt and nut. The print, if tolerances are good enough on your 3D printer, should just be press fit into the T-Piece. It is designed for a 100mm DIN PVC (sewer) pipe, so your results may vary if you use it for another type of PVC pipe.

I could imagine you can scale the parts in the slicer up or down to fit the pipe diameter you need, but your milage may vary.

I printed it in PLA, but you can probably use other filaments aswell. It is designed so you don't need supports or fancy print settings.

Note: The design is not extremly sturdy. If you use too much force for the small fingers on the vent piece will break and you have to print it again.

Happy printing.