玩牌托盘

Playing Card Holder

2024-05-02 22:09:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I bought this case to store my Cards Against Humanity decks. If I leave my decks in the boxes they came in, I couldn't fit them all in the case. If I used the dividers with the cards loose, they fit weirdly. It had too much space and not enough dividers to hold them securely. I quickly modeled this in Fusion 360 to get the max storage I could in this case.

There are a few versions. The long versions are 251 mm long, which will require a large print bed or maybe printed diagonally. I made the short version 1/3 of the length so it could be printed on smaller printers. There are also versions to set the cards upright or on their side depending on what you need.

I realize the size is pretty specific to my needs. This could easily be modeled in Tinkercad or any other modeling tool. I'm hoping this inspires those just getting started to dive in and start solving problems.