3dsjs

脱水机网格推杆外框

Dehydrator grid pusher outer

2024-05-03 01:35:13

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

Every so often when you dehydrate fruits they will get stuck to the grid. This is a simple stamp to help you push out your dried fruits from your dehydrator grid so you can get them out in one pice.

My grid dimensions are as follows:

  • Inner dimensions of a block on my grid: 6.5mm
  • The width of the wire on the grid: 0.75mm

The model includes a small, medium, large, and extra large stamp. The small and medium stamps can be used for bananas, garlic, and so on. The large and extra large stamp can be used for fruits like mango and papayas.

https://www.tinkercad.com/things/7NXraNGQwvX

Tags

脱水机网格推杆外框
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15