Bresser MQTTArduino项目箱子快件连接设计

Bresser MQTT Arduino project enclosure snap-fit

2024-05-03 01:49:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I got the Bresser MQTT project by Mattias Prinke working and I've modelled a nice and small enclosure for it.

This can be used as a base for other projects on a 40x60 prototype PCB. When a nodeMCU ESP8266 in soldered in the exact place as on my print, the USB port on the microcontroller can be used for power and even reprogramming without the need for the enclosure to be opened.

There is a hole for a 3mm LED.

I've embedded the Bresser logo in the top half. I've also modelled the logo so you can print it in a contrasting colour. I chose not to, but the logo prints in about 10 minutes, so please do experiment!

There is no intent or interest to use this enclosure in any commercial way. The logo is used as a hommage to my brilliant weather-station. Please Bresser, be kind! :)