Funtime活泼的小狐狸
Funtime Foxy
2024-05-03 02:18:33
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a remix of the user model "Aerski" with changes made to certain parts of the figure that are difficult to print.
For example, the ears, the shoulders, the fingers that float in the air on the original model, or the inside of the jaw.
With this new model, you'll be able to print your Funtime Foxy figurine better than I did, because I used a wet filament.
I advise you to print it as shown in the picture, horizontally, so that the supports are easier to remove and the teeth print much better. This position also eliminates the need to generate supports in the jaw.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Geeetech A10 DD Orbiter 2.4 E3dV62023-04-21 -
Pokeball 3D模型2023-04-29 -
Hikvision DS-KV6113 45度角支架2024-01-01 -
FSU - Osceola和Renegade站在小台子上 - Florida State2024-01-13 -
雌性独眼巨人2024-04-17
最热下载
-
开源 1:10 四驱竞技型 RC 车2025-07-08 -
分形手玩星2023-03-26 -
苹果 HomePod mini壁挂装饰2024-03-19 -
街用迷你四驱车轮子2024-05-01
最新模型
-
中指2025-05-17 -
Tomy赛车驾驶舱部件2024-05-08 -
HO比例石墙材质2024-05-08 -
X轴清洁：Prussa/Mendel打印机维护技巧2024-05-06 -
可调节臀部垫（适用于HW97K）2024-05-06