Garmin 飞行杆出门式安装支架 - BLKTEC R8
Garmin Aero Handlebar Out Front Mount - BLKTEC R8
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Garmin out front mount for a BLKTEC R8 handlebar. Designed for the Edge 830.
May work with other handle bars with 20mm pitch bolts on the underside of the bars for out front mounts.
I found most of the other out front mount designs were too thin and ended up shaking a lot on the bike so designed a new thicker mount.
It requires a Garmin insert which attaches with 2 small bolts on the underside. These can be removed from an existing Garmin clamp on out front mount or search for “Garmin mount insert” on Amazon or Ebay.
I haven't tried it but I assume it should work for Wahoo as well, though obviously won't have the aero integrated profile.
I've printed mine in PLA, 0.12 layer height, 3 wall loops, 5 shells top and bottom, 30% cubic infill.
Support - normal, 5deg threshold angle.
This worked well for me and is very stable on the bike. May be better in Nylon or ASA for better outdoor properties but I haven't tried that.
Can be printed either way up depending on what finish you want on the top surface but I found it printed best with the top surface on the print bed.
I added a couple of pauses to change the material to add the gold strip to match my Orro Gold :-)
When I get time I will make some variants with different hole pitches, and lengths for other bike computers like the Edge 1030.
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu P1P
- Rafts:No
- Supports:Yes
- Resolution:0.12
- Infill:Cubic 30%
- Filament brand:
Mixed
- Filament color:
Matt Black and Silk Gold
- Filament material:
PLA
- Notes:
3 Wall Loops
5 Shells Top and Bottom
License
Garmin Aero Handlebar Out Front Mount - BLKTEC R8
byAD79is licensed under theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.
相关内容
猜你喜欢
联系我们
热门推荐
-
地心版怪兽型6x18针孔Gamera2023-03-27 -
Gue'Ron'Vesa MK 2 by El Mutanto2024-04-03 -
巨魔头像 012024-04-21 -
阿兹姆·赫拉·艾科 Ar_4064 电线固定器 3D模型2024-04-23 -
蚂蚁试管巢穴 - 试管通道 - 阿芙罗狄特巢穴2024-04-28
最热下载
-
车身RC 1/10 全套2023-03-26 -
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
「春雷」弹壳弹出式泡沫飞镖发射器（进行中）2023-03-26 -
Delta设置校准为Klipper2023-04-23 -
螺旋锥形手玩具（全新）2024-05-08
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
泡泡底拖鞋2025-07-17 -
艺术雕像（女性）2025-07-16 -
丰满跪姿美熟女2025-07-16 -
兔女郎半身像2025-07-15