Wimos D1迷你型号与复制品支撑架构

Wimos D1 Mini & Clone Mount

2024-05-03 08:13:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Wimos D1 Mini mounting block for direct wire connections. The center cavity is for placement of resistors or small components to protect them. The holes are 4mm in CAD, (3.5mm real world) perfect for 3mm screw, (#6 imperial). The tracks in the sides and bottom allow for wire exit. I left out tracks in the top to avoid interference with the USB port. There is an outline of the D1 Mini embossed in the top to minimize incorrect placement of the board.
Use D1 mini boards that come with the extended headers as these are what is inserted into the top section.

Print Settings

Printer brand:
FlashForge
Printer:
Adventurer 3
Rafts:
Doesn't Matter
Supports:
No
Notes:
I used ABS with a .6mm nozzle for the shown model, however it should work just as well with any material that isn't conductive.

Wimos D1迷你型号与复制品支撑架构

朋友，你觉得上面这个模型，属于下面的哪个分类？