牙刷与牙膏置物架

Toothbrush & Toothpaste Holder

2024-05-03 11:32:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

With a mason jar full of toothbrushes and multiple toothpaste containers on the counter, I wanted to begin learning how to model and produce a print that cleans up the sink space.

This (3) toothbrush, (2) toothpaste holder is simple in design and should be easy to separate and clean.

With my printer calibrated to the best of my ability, this provided a near vacuum fit between the two. The outer holes can easily fit the wide shaped toothpaste caps (40mm) and the toothbrush holes fit a wide based toothbrush (16mm - not electric).

Print with top and bottom surfaces on the build plate. No need for support from my experience as a novice printer with my specific set up (Creality K1 - Calibrated).

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
No
Supports:
No
Resolution:
.012
Infill:
15
Filament brand:
Creality
Filament color:
White
Filament material:
Hyper PLA
Notes:
Would suggest printing with a more hydrophobic material but was able to test print and confirm fitment with Hyper PLA after having it loaded and calibrated for the printer.
The tolerance is extremely tight; with a properly tuned printer the fitment is very satisfactory.