3dsjs

网络交换机垂直支架

Network switch vertical stand

2024-05-03 14:51:39

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

The 5 port and 8 port network switches I bought have different heights and depths, and I want to use a single design to fit most.

I designed the vertical stand to hold a box around 28mm wide/thick and able to accommodate varying height and depth (90mm to 110mm is ideal, bigger range should be ok)

Print in place, no supports required. Requires around 30 to 50g of filament, depending on your infill settings.


Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link:

XikeStor 6-Port 2.5G Simple L2 Switch Web Managed
https://s.click.aliexpress.com/e/_DdTUmjH

AMPCOM 2.5GbE Managed Switch 8 Port
https://s.click.aliexpress.com/e/_DkoE3pN


Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j

For Amazon affiliate links
https://wp.me/peMLu6-2C

Telegram Channel for limited time tech deals
https://t.me/limitedtimetechdeals 

Tags

License

CC BY-NC

Network switch vertical stand
byZer0sis licensed under theCreative Commons - Attribution - Non-Commerciallicense.

网络交换机垂直支架
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15