Colgate 牙膏盖模型

Toothpaste Cap - Colgate

2024-05-04 04:32:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I couldn't get other toothpaste caps to actually fit my toothpaste tube.
So I found this library and fiddled with the settings to produce this simple toothpaste cap that is easy to print.

it uses:
buttress_thread(16.3, pitch=2.1, length=8, internal=true,n_starts=1);
16.3 is the outer (largest) diameter of the thread (measured and then tweaked)
pitch=2.1 is how many mm there are between peaks on the threads (measured)
length=8 is how many mm long the threads should be.

I am not sure what internal and n_starts does.

The threads.scad and helix.scad I did not modify (except commenting out the demo)

Print Settings

Printer brand:
FlashForge
Printer:
Creator Pro
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
40%
Filament brand:
generic
Filament color:
white
Filament material:
PLA
Notes:
I slowed down the print speed to about 50% of normal as I was getting strands inside the threads. Probably just a problem with the filament I was using.