多板线轴固定架

Multiboard Wire Spool Holder

2024-05-04 06:27:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a multiboard version of the modular wire spool holder.

It snaps in the multiboard using Push-Fits. You need to have a Multiboard Snap to attach it to the board:https://www.multiboard.io/parts-library/snaps

There is a builtin support that needs to be cut with an exacto in the front wire slot.

It is compatible with the original spools from the Modulare Wire Spool Holder, but you can also use my redesigned threaded spools to go with it. Another redesign to remove the need for screws or glue.

https://www.thingiverse.com/thing:6436132

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament brand:
Sunlu
Filament color:
Transparent Red
Filament material:
PETG
Notes:
Support is only needed for the Push-Fit in the back.
There is a builtin support that needs to be cut with an exacto in the front wire slot.

Tags

multiboard spool spool holder wire wire holder

License

CC BY-NC

Multiboard Wire Spool Holder
bymmassonis licensed under theCreative Commons - Attribution - Non-Commerciallicense.

多板线轴固定架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

Makita 10.8V 钻具与电池组
2023-04-07
Glock 17/34 Solidworks 模型文件
2023-04-21
SATA male THT 15-pin right-angle ATX power connector (3D files, f3d file, and KiCad files included)
2023-08-02
佳能EOS镜头连接接口
2024-01-11
安益卡通 i3 迷你 HGX 轻量挤出器
2024-04-21

最新模型