L型夹具用于OG星追踪器

L Bracket for OG Star Tracker

2024-05-04 16:25:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A simple L-Bracket, to allow for more fixing options for larger lenses and cameras to the OG star tracker. Simply unbolt the central boss from the main pulley and replace with this bracket. You may need longer M3 screws and some washers.

The slot should have supports added, unless you are very confident in your bridging! A 1/4 tripod screw will just fit, and will remain captive once pushed through. Ideally you want a tripod screw with about 6mm of unthreaded length between the head and the start of the thread. These are pretty easy to find.

To print, use in the supplied orientation, 0.3mm resolution is fine, and use 50-60% infill for plenty of strength, but not too solid, so as to prevent warping while printing.