车把上的RAM安装
RAM Mount for Handlebar
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
This is a RAM Mount for 22mm and 2,54mm (1inch) Handlebars.
There are two different models for the bottom part: One is designed for M5 nuts and the other is designed for melt-in threads. Choose the one you like.
Beside the printed models you need two 25mm M5 Allen screws and two M5 nuts or two M5 melt-in threads.
For best results, see the notes at the section Print Settings below.
Print Settings
- Printer brand:
Artillery
- Printer:
Artillery Genius
- Rafts:Doesn't Matter
- Supports:Doesn't Matter
- Resolution:0.2 layer height and 0.4 nozzle
- Infill:15%
- Filament brand:
SUNLU
- Filament color:
Black
- Filament material:
ABS recommended
- Notes:
To ensure sufficient stability, a wall thickness of at least 6 perimeters must be used. Otherwise you risk that the ball could break off.
As always with vehicle parts, I recommend printing in ABS or PETG and not to use PLA. To avoid warping, choose a brim of 8 to 10mm.
Tags
License
RAM Mount for Handlebar
byFrankBeris licensed under theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.
相关内容
猜你喜欢
联系我们
最新模型
-
Fcm书签2024-05-08
-
创实 Ender-3s1 Y轴电机支架2024-05-08
-
Taco Bell国际象棋套装:骑士版本2024-05-08
-
福特OBS后部车厢地板插头2024-05-06
-
线轴固定器902024-05-06
最热下载
-
东方风格机械关节龙3D模型2023-03-26
-
沃帕尔六足行走机器人2023-03-26
-
Quansheng UVK6 桌面支架2024-01-10
-
BF1 单枪手机 08/18型号 Lego2024-03-23
-
F1赛船3D模型固定文件2024-05-08