Umarex UX Tornado Brodax 1/2" x 20 UNF Silencer Suppressor Moderator Adapter H8R
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Silencer/Suppressor/Moderator Adapter for the Umarex UX Tornado/Broday/H8R.
It makes it possible to mount Airgun Silencer to the awesome Tornado/Brodax .177 / 4,5mm cal. Gun (or 6mm BB at the H8R) and makes it, depending on the silencer, super quiet and so much fun to shoot.
It has a 1/2" - 20 UNF Thread to fit most of the airgun silencers on the market like the Weihrauch etc.
Thread length is 18 mm or 0,7 inches.
To use it, you need to open the Gun and replace the original barrel tip with this adapter. Pretty easy.
Have fun and give me a Like :)
+++++++++++++++++++++++++++++++++++++++++++++++++++
I'm a enthusiastic 3D Maker and engineer with an Airgun Hobby.
If you need specific stuff just drop me a message and I try to help :)
+++++++++++++++++++++++++++++++++++++++++++++++++++
.
Print Settings
- Printer brand:
Anycubic
- Printer:
Kobra
- Rafts:No
- Supports:No
- Resolution:0.2 mm
- Infill:50
- Filament brand:
eSUN
- Filament material:
PLA+
- Notes:
Print with Brim or better 1-Layer-Support for better
adhesion (Spoon-Anti-Warping in Cura)
Post-Printing
Tags
License
Umarex UX Tornado Brodax 1/2" x 20 UNF Silencer Suppressor Moderator Adapter H8R
bySeesideris licensed under theCreative Commons - Attribution - Non-Commerciallicense.
猜你喜欢
联系我们
热门推荐
-
参数化的两部分模具生成器（用于OpenSCAD）2023-03-26 -
LDRC Drift Extended Axle with Spacer2024-03-21
-
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
Flashforge Adventurer 3 HEPA 空气过滤器2024-05-02
最热下载
-
Kumonga的孩子与澳大利亚蜘蛛驯兽队2024-03-17 -
Makergear M3 M2喷嘴标签2024-03-27 -
Arduino或5V继电器控制板固定架2024-04-02 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
幻想磁力2024-05-03
最新模型
-
为我的教学2024-05-08 -
探索Endeavor OS的独特之处2024-05-08 -
母亲节墙面艺术2024-05-08 -
塞勒斯尼亚锁扣2024-05-06 -
莫洛托夫标记笔3D模型2024-05-06